Barry Jay's Marine is an authorized reseller of RockGARD products
  Barry Jay's Marine is an authorized reseller of RockGARD products

Choosing the Right RockGARD Size For Your Boat

Size Centre Post Height x Length
PWC / Small 27″ x 6.5′
Medium 33″ x 9′
Medium X Long 33″ x 11.5′
Large 39″ x 10′
Large X Long 39″ x 12.5′
Max 47″ x 11′
Maxx X Long 47″ x 13.5′
Picklefork 35″ x 12′
Medium Blunt Front 33″ x 9′
Medium X Long Blunt Front 33″ x 11.5′
Large Blunt Front 39″ x 10′
Large X Long Blunt Front 39″ x 12.5′
Maxx Blunt Front 47″ x 11′
Maxx X Long Blunt Front 47″ x 13.5′

RockGARD Sizing & Boat Guide

1

Determine Center Post Height

  • Measure the vertical distance from the top of your trailer frame (where the guard will mount) to the top of the boat’s bow (the gunwale or rub rail).
  • Goal: You want the guard to sit slightly higher than the bow to deflect debris over the vessel.
2

Determine Length (Standard vs. XL)

  • Measure from the proposed mounting point on the tongue back to the trailer fender.
  • Clearance Check: Ensure that the side posts of the RockGARD will not interfere with the fenders. The distance from the center post to the trailer fender must be greater than the length of the guard wing.